Select the placement option for the dosing complex

[parent] => 45 [count] => 6 [filter] => raw )

---

CBP operation mode - fully automatic on the principle of "single button".

Twin-shaft concrete mixer SICOMA MSO 1750 is installed on the elevated structure with the discharge height - 4 m. Concrete mixing plant is equipped with a chevron belt conveyor for lifting and loading of the aggregates into the mixer.

---

ZZBO is the official dealer of SICOMA concrete mixers in Russia and the CIS!

---

For storage and precise batching of the inert materials dosing complex DKM-40. It is possible to supply bunkers of increased volume (up to 80 cubic meters). Inert materials are loaded and stored in bunkers, the number of bunkers is 2 x 20 cubic meters. meters, the total volume of bunkers is 40 cubic meters. meters. A dosing belt conveyor is installed under the bunkers, on which components are accurately dosed; the components are supplied from the bunkers by opening gate valves, the gates are controlled by a pneumatic system.

Upon achievement of the required batch of the inert materials, the conveyor is turned on and they are discharged into the belt conveyor's receiving hopper and after that into the mixer.

---

Protect inert materials from precipitation using Shelter of the strip conveyor!

---

The cement is stored in a special warehouse - cement silo (not included in the basic package). Silos for cement must be selected the rate of two daily stock performance. For feeding cement from a cement silo dispenser must acquire the correct length screw.

---

Cement silos, silo piping and augers are always in stock in Zlatoust!

---

Using a screw, cement is supplied to the BD-60 dispenser unit, which consists of a 600 kg cement dispenser, 300 liters of water and a 40-liter chemical additive dispenser. Each dispenser is located on three high-precision load cells and a rigid frame, which increases dosing accuracy. The cement dispenser is equipped with a vibrator MVE 300/3 to encourage the removal of cement when it sticks.

---

All components of the mixture are mixed, after obtaining the necessary homogeneity of the mixture, the pneumatic valve of the concrete mixer is opened and the mixture is supplied to the concrete mixer truck or receiving hopper.

Then the cycle is repeated.

---

In one cycle, 1 cubic meter is produced. meters of finished concrete or mortar, the cycle lasts about 50 seconds. Installation capacity 50…75 cubic meters. meters of finished concrete or mortar per hour of work.

Technical Features