Concrete factory tape-160
Enquire conditions
and delivery time
We'll call you back within 15 minutes
Specify your requirements
Send prices and terms of delivery
- Twin-shaft concrete mixer MAO 4500
- Multi-channel uniform water spray system
- Replaceable wear-resistant Ni-Hard cast iron armor, strength 500 HB
- Pneumatic gate - two-side
- Hydraulic gate opening/closing station with manual opening option
- Magnetic shutter position sensors
- Safety sensors (2 types): limit switch on the inspection hatch and push-button switch with key for maintenance
- Automatic lubrication system for sealing units and valve
- Connection set for pneumatic equipment
13 841 $
- Overpass EL 1500-2G-SCM Reinforced design, adapted for unloading concrete at a height of 4,000 mm
- mixer platform with supporting structures
- Ladders for equipment maintenance
- Fence along the perimeter
- Staircase with handrails
- Funnel for unloading concrete with rubber guide
- Fastening construction for pipes and electric cables
- Hardware for the assembly trestle
- Coating: shotblasting, double coloration with drying chamber
24 488 $
- Belt conveyor 17.5 meters, belt width 1,000 mm, assembled
- Drive: gearmotor 30 kW
- Receiving hopper
- Support frame, reinforced, made of sheet metal. Tilt angle 26 degrees.
- Leading drum with lining. ⌀ 390 mm, width 1100 mm
- Driven drum. ⌀ 337 mm, width 1100 mm
- Chevron tape, thickness 10 mm, joined by hot vulcanization.
- The roller support is grooved (painted). ⌀ 89 mm
- Support rollers (painted). ⌀ 89 mm
- Guide rollers (painted). ⌀ 57 mm
- Set of platforms, fences and stairs (optional)
- Conveyor cover kit (optional)
- Machinery certificate
12 261 $
- Support frame (powder coated) with stepladder
- Cement dispenser with 1800 kg dosage:
- Four inlet pipes for augers (Two are covered with lids)
- Connecting outer sheath with collar clamps
- Overpressure system
- Unloading disc pneumatic valve ∅300
- Strain gauges - 3 pcs.
- Signal amplifier - weight sensor
- Pneumatic distributors - 5 pcs.
- Vibrator MVE 300/3 - 1 pc.
- 900 liter water dispenser (powder coated):
- Strain gauges - 3 pcs.
- Water dump pump
- Signal amplifier - weight sensor
- Chemical dispenser additives - 1 pc. 70 liters(stainless steel):
- Strain gauges - 2 pcs.
- Ball pneumatic valve ∅25– 1 pc.
- Ball pneumatic valve ∅50– 1 pc.
- Pneumatic disc valve ∅80 – 1 pc.
- Signal amplifier - weight sensor
73 428 $
- Inert inert bunkers BI-120 (4 x 30) - 8 sections. Total volume 120 cubic meters. meters
- Preparation under registers installation for heating inert materials
- Pneumatic equipment - 8 electric pneumatic distributors, a set of fittings and tubes, 8 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Vibrator MVE 300/3 - 10 pcs.
- Dispenser inert CI-12 (conveyor) with the lined drive drum. Drive power 18,5 kW
- Rollers with anti-corrosion coating
- Strain gauges - 6 pcs.
- CAS connecting box
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
- Software on your own SCADA system complete with a monoblock: accounting for the consumption of materials and equipment operation, remote access and control over the work in the local network
- Automatic operation by pressing "one" button
- Recipe storage database for concrete production
- Programmable Logic Controller
- Сontrol panel case protection - IP54
- Power cabinet case protection - IP54
- Control, protective and switching equipment "Omron", "Siemens"
- Set of diagrams and instruction manual
- Hardware for assembly RBU: metering complex overpass screw silage
- Hardware, accessories
- Wire for screw fixing
- Kit for connecting the database (pnevmotruba, sleeves, bends, RVC 51-70 clamps, duct PVC-5-C-60)
- Limit switch for the database
- Kit vodopodvedeniya (pipe bends, sleeves, T-joints, anchor bolts, brackets)
- Kit RBU pneumatic (air tubing, pnevmotruba, fittings, hardware)
- Set of cables
- Couplings (5 titles)
- compactor
- Acid sealant TempPlus
- Power and control cables, protected by metal hose (in mobile plants they are laid in frame)
- Set of locking sensors and executing mechanisms position sensors (skip, mixer's gate, etc.)
- Planetary concrete mixer MPC 3000
- Mixer drive - 90 kW
- Replaceable wear-resistant armor made of cast iron with a strength of 500HB
- The sector valve with rubber seal is equipped with a hydraulic drive with the possibility of manual opening
- Inspection hatches are equipped with an access security system
2 295 $
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- One window (PVC, double glazing), insulated door with lock
- Lighting
- Slinging loops
- Weight - 180 kg
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- Two viewing windows (PVC, double glazed windows), insulated door with lock
- Lighting
- Air conditioning
- Operator table
- Operator's chair
- Heater 2kW
- Slinging loops
- Weight 1000 kg
- Cement filter AIRFILL25 assembly (Turkey) in a rigid package
- Cartridges pneumatic cleaning system
- Adjusting ring
- Operational documentation
- Universal double-row registers for heating inert materials bins - 4 sets
- coolant type steam (hot air under pressure)
- The thermal load of up to 180 degrees
- Airfill v25 cement filter with a vibration cleaning (Türkiye)
- Adjusting ring
- Operational documentation
20 204 $
- Silo can (V=103m³): lid - 4 sectors, cylindrical section - 28 sectors, large cone - 4 sectors, small cone
- Mounting frame
- Stairs
- Cover protection enclosure - 11 sectors
- Loading pipe d 102 with connection lock
- Inspection hatch (Viewing window for inspection and cleaning of the cone)
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Frame for transportation
- Hardware for the assembly of a silo
- Polyurethane sealant Soudaflex FC 40 gray 600 ml - 15 tubes
- Machinery certificate
- Cement filter with vibration cleaning FCS-14 NEON assembled
- Filter elements - 9 pieces
- Stainless alloy steel body
- Vibrator - cartridge vibration cleaning system
- Silage setting ring
- Lid
- Machinery certificate
- DUST PRO cement filter assembly (Türkiye)
- Cartridges pneumatic cleaning system
- Adjusting ring
- Operational documentation
- Cement filter with vibration cleaning FCS-24 NEON assembled
- Filter elements - 14 pieces
- Stainless alloy steel body
- Vibrator - cartridge vibration cleaning system
- Silage setting ring
- Lid
- Machinery certificate
- Emergency pressure relief valve PV273 assy
- Adjusting ring
- Operational documentation
- Cement level sensor G2 1/2 220V assy in a package
- Adjusting ring
- Operational documentation
- Butterfly valve DN300
- Handle for gate control
- Operational documentation
CBP operation mode - fully automatic using the one-button principle.
Twin-shaft concrete mixer SICOMA MAO 4500/3000 установлен на эстакаде, на высоте разгрузки готовой смеси 4,2 метра. Бетоносмеситель оборудован специальным усиленным ленточным конвейером для загрузки инертных материалов в бетоносмеситель.
ZZBO is the official dealer of SICOMA concrete mixers in Russia and the CIS!
It is possible to supply a concrete plant with a concrete mixer from the manufacturer SICOMA.
For storage and precise batching of the inert materials Concrete mixer equipped. Inert materials are loaded and stored in bunkers, the number of bunkers is 4, 30 m³ each, the total volume of bunkers is 120 m³. A dosing belt conveyor is installed under the bunkers, on which components are accurately dosed; the components are supplied from the bunkers by opening gate valves, the gates are controlled by a pneumatic system.
When the required dose of inerts has been collected, the conveyor is turned on and the dosed components are fed onto an inclined belt conveyor. The mixture rises along the conveyor and enters the mixing chamber of the concrete mixer.
Protect inert materials from precipitation using Shelter of the strip conveyor!
The cement is stored in a special warehouse - cement silo (not included in the basic package). Silos for cement must be selected the rate of two daily stock performance. For feeding cement from a cement silo dispenser must acquire the correct length screw.
Cement silos, silo piping and augers are always in stock in Zlatoust!
Cement is fed by auger into the dosing unit BD-180, which includes dispensers: cement - 1800 kg, water - 900 l and chemical additive - 70 l. Each dispenser is mounted on a rigid frame and equipped with three high-precision load cells to improve dosing accuracy. The cement dispenser is equipped with an MVE 300/3 vibrator to prevent freezing and ensure stable material flow
In the mixer, the components are mixed; After achieving the required homogeneity, the concrete mixer gate opens and the mixture is fed into the concrete mixer truck or receiving hopper. Then the cycle repeats.
3m³ is produced in one cycle ready-made concrete (or mortar); Cycle duration is about 70 s. Installation capacity - up to 160 m³ ready concrete (or mortar) per hour.
- Twin-shaft concrete mixer 4.5m³ with belt feed
- Installed in a place where concrete is needed, does not require foundation preparation SCADA system complete with a monoblock: accounting for material consumption and equipment operation, remote access and control of work
- Perevozka 3 uh evrofurah places plants
- Full 2 year warranty
Technical Features
- Productivity, m³ hour up to 160
- mode auto
- Concrete mixer SICOMA MAO 4500/3000 4500 l loading
- Hoppers (number x volume m³) 4 x 30
- Design summer
- Load of inert materials into the concrete mixer belt conveyor
- Total power, kW 182
- Dimensions of the basic configuration:
- Weight, kg 40000
- Length, mm 33580
- Width, mm 4050
- Height, mm 10470
Quality
certificates
Products
in stock
Individual configuration
with prices for each item
Mobile
commissioning
available
Worldwide
delivery
in trucks or containers
Geography of supplies 2011-2026
Own production, in-stock products and
professional team allow us guarantee
most competitive prices, shortest
possible delivery time and high-quality goods
Call UK hotline
Our managers will answer all your questions from Monday till Friday:
from 06:00 a.m. to 05:00 p.m. (GMT+3, Moscow time)
Address: Russia, Zlatoust, 57 Suvorov
e-mail: sales@zzbo.ru
Place your order
We will send you the price,
conditions and terms of delivery
Response within 1 hour
You will get the offer with
individual delivery and payment conditions

